Any nitrite-free HD Organic Acid Technology (OAT) coolant is compatible with Prestone ® HD 50/50 Prediluted NITRITE FREE Extended Life (ELC) Antifreeze/Coolant, and it is recommended for use in any diesel-powered commercial vehicle or stationary engine that contains aluminum or other engine metals.
Make certain that it is a high-quality coolant that has been specifically designed for aluminum engines. Unlike other antifreeze/coolants, Prestone® Extended Life Antifreeze/Coolant is compatible with ANY antifreeze/coolant, regardless of color, and may be used in ALL types and models of automobiles and light duty vehicles.
What antifreeze is good for aluminum engines?
However, because of some concerns with the interaction of organic coolants with lead solder, using OAT in a copper radiator is not suggested. If your radiator is aluminum, clean your whole cooling system with water and then refill with a 50/450 or 60/40 combination of OAT, you should be OK.
Is green coolant safe for aluminum?
Their Zerex Original Green coolant contains ethylene glycol, which is suitable for use in both aluminum gasoline engines in passenger cars and heavy duty diesel engines in trucks if you own a fleet of vehicles.
Is Prestone Dex Cool safe for aluminum?
Materials Used in Engines Additionally, DEX-COOL is specially formulated to interact with aluminum engines, as seen by the differences in composition and color between the two coolants. Using DEX-COOL for an aluminum engine will aid to reduce corrosion, assuming that the car’s previous owner did not use typical green coolant in the vehicle.
Does antifreeze corrode aluminum?
Some forms of antifreeze can corrode aluminum cooling system components, hence it is important to use antifreeze that has been specifically designed for aluminum cooling system components when this metal is present. When the pH of the coolant rises over 9.0, aluminum corrosion becomes more pronounced and severe.
Is Prestone coolant safe?
Yes. Despite the fact that Prestone is an OAT coolant/antifreeze, it also includes anti-corrosion chemicals that safeguard your cooling system. It is safe to use in any automobile, and it provides the same levels of protection in all vehicles without causing any harm.
Is Peak antifreeze good for aluminum?
Yes. Prestone is an OAT coolant/antifreeze that also contains anti-corrosion chemicals to help preserve your cooling system from wear and damage. Because it is universally applicable and provides the same degrees of protection in all vehicles, it may be used in all vehicles without causing harm.
What antifreeze is silicate free?
OAT antifreeze has a replacement period of 150,000 miles, or approximately 5-7 years, and, depending on the manufacturer, is either silicate-free, phosphate-free, or both of these characteristics. OAT antifreeze first appeared on the American market in 1994, when General Motors introduced Dexcool Orange.
Can I use antifreeze instead of Dex-cool?
GM has been using a special sort of coolant called as Dex-Cool for a number of decades. Despite the fact that it is not labeled as antifreeze, it performs the same function, thus there is no need to worry about changing Dex-Cool during the winter months or anything like that.
What happens if you use green coolant instead of Dex-cool?
The green and orange coolants are incompatible with one another. When they are combined, they produce a gel-like material that prevents coolant flow and, as a result, causes the engine to get overheated.
When did GM stop using Dex-cool?
There is a chemical reaction between the green and orange coolants. As a result of their combination, they generate a gel-like material that prevents coolant flow and, as a result, overheats the engine.
What is green antifreeze used for?
Green antifreeze is manufactured with precise adjustments to the formula that are intended to assist avoid metal corrosion in a vehicle’s cooling system, according to the manufacturer.That older formula is generally intended for automobiles manufactured prior to the year 2000, which were constructed with a greater proportion of steel and copper components than newer vehicles are constructed with.
Is antifreeze corrosive to metal?
A unique adjustment to the recipe is used to create green antifreeze, which is designed to assist prevent the corrosion of metal components in a vehicle’s cooling system. That older formula is generally intended for automobiles manufactured prior to the year 2000, which were constructed with a greater proportion of steel and copper components than newer vehicles are constructed with today.