Often asked: How much weight can a closet rod hold?

Aluminum Anodized Elite 1-5/16”: Up to 80 lbs. Stainless Steel 1-1/16”: Up to 95 lbs. Steel Polished Chrome Round 1-1/16”: Up to 110 lbs. Steel Polished Chrome Round 1-5/16”: Up to 170 lbs.07-Oct-2019

  • A 6-foot span of closet rod can hold certain amounts of weight, depending on its shape and what it’s made of. Six feet of oval aluminum anodized rod can hold 45 pounds. The same length of rod can hold 170 pounds if it’s made of 1 5/16-inch steel polished chrome.

How much weight can a closet shelf hold?

Wire shelves make very sturdy shelving. They can carry loads between 200 and 400 pounds. The weak point in these shelves isn’t the shelves themselves, but the closet shelf bracket. Most wire shelves are held in place with a thin metal rod attached to rubber brackets that the shelf sets in.

How much support does a closet rod need?

For a single rod application, plan 60-inches from the floor for placement. You will need at least 1-foot, 9-inches (24-inches is standard) away from the back wall for hanging. When spanning an opening of more than 48-inches, consider adding a center support to the closet rod for added stability.

How long can closet rods go without support?

Click to see full answer. Regarding this, how long can closet rods go without support? Closet Rod is available in custom lengths up to 96 inches. A center support is required for beams longer than 48 inches.

How do I know how much weight a shelf can hold?

Multiply the number of brackets by the safe load of the bracket to determine the safe load capacity for the entire shelf. For a shelf that has three brackets rated for 250 lbs. the safe load for the brackets is 62.5 lbs., and the capacity for the shelf, as a whole, would be 187.5 lbs.

You might be interested:  What Is Needed To Patch Drywall?

How far can a shelf overhang a bracket?

Limit shelf overhangs to no more than 12 inches. Masonry walls require inserting either expansion shields or lead anchors. Again, space the brackets every 16 inches for heavy loads and every 32 inches for lighter loads.

How deep should closet rod be?

Opt for a closet rod depth of at least 12 inches.



If you don’t leave sufficient space between the rod and the rear wall, one side of all garments will wrinkle from being bunched up against it. You can avoid this clothing disaster by mounting the rod at least 12 inches from the rear wall of the closet.

How far apart should double closet rods be?

When installing double rods, hang the top rod 80 inches from the floor and the bottom rod 40 inches from the floor. Leave at least 3 feet of space between the two rods. These systems usually work best for skirts, blouses, shirts or pants folded over a clothes hanger.

How deep should a hanger closet be?

No matter whether your space is walk-in or reach-in, most closets intended for clothing will include clothes rods for hanging clothing. Unless you are working with tiny baby garments, your hangers will require a closet with at least 22-inches of depth in order to swing freely on the rod.

How do I create my own closet space?

7 Ideas for Improving Any Closet

  1. Use the vertical dimension — in both directions.
  2. Think about lighting.
  3. Know your wardrobe — and habits.
  4. Design in visibility.
  5. Don’t ignore the floor.
  6. Watch out for mold, mildew, and other still-air breeders.
  7. Beware of cedar.
You might be interested:  How Does A Pump Float Switch Work?

What is the average size of a walk in closet?

A standard full-size walk-in closet for two people should measure a minimum of 7 by 10 feet. It should preferably have an area of 100 sq. ft as this allows you to have storage units on all three walls with even a sitting area in the middle. In case you want a smaller one, small walk-ins can be built in as low as 25 sq.

How far from the wall should a clothes rod be?

A common convention is 12″ from the back wall to the center of the rod. People typically put the closet rods in the middle of the closet. Minimum closet depth is 24″ so that puts the closet rod at 12″ too. Certain types of clothing tend to extend past the edge of the hanger.

How long are closet rods?

Double-hung rods are typically 4 feet long each. Usually, one person takes up about 4 feet of closetrod length.

Leave a Reply

Your email address will not be published. Required fields are marked *