When Using The Pass Technique With A Fire Extinguisher How Far Should You Stand From The Flames?

The right response is C, which is 8 feet. According to the FEMA (Federal Emergency Management Agency), it is advised that you stand at least 8 feet away from a fire when extinguishing it. Number five, PASS, stands for putting out a fire with the use of a fire extinguisher.

As you prepare to use the fire extinguisher, you should keep a distance of between six and eight feet between you and the flames.

Is it necessary to go as close to the flames as possible while utilizing the pass technique with a fire extinguisher? Make sure you’re at the right distance. Ensure that you are standing 6 to 8 feet (1.8 to 2.4 m) away from the fire before releasing the extinguisher’s hose. If you are positioned closer to the fire, move closer to the fire.

How to use a fire extinguisher correctly?

In order to effectively operate a fire extinguisher, experts recommend that you learn the phrase P.A.S.S. — ″P″ stands for ″pull the pin.″ Aim for the hearth of the fire with your shot.

What is the range of a fire extinguisher?

In most cases, the range of most fire extinguishers is between 8 and 12 feet (2.4 to 3.7 m). Ensure that you are standing 6 to 8 feet (1.8 to 2.4 m) away from the fire before releasing the extinguisher’s hose. If you are positioned closer to the fire, move closer to the fire.

When using a fire extinguisher How far should you stand away from the fire?

Aim for the low-hanging fruit. Standing up to ten feet away from the flames is recommended. The discharge horn of the extinguisher should be aimed at the front edge of the fire’s base (the lowest point of the fire nearest you).

You might be interested:  What Is The Best Waterproof Plank Flooring?

How far should you stand from a fire when using an extinguisher to put it out quizlet?

Pull the pin at the top of the extinguisher to release the pressure. 2. When using an extinguisher to put out a fire, keep your back to the wind and at least six feet away from the flames.

When using a fire extinguisher the pass method is recommended PASS stands for?

If you can remember the abbreviation PASS, which stands for Pull, Aim, Squeeze, and Sweep, it will be much easier to remember how to use a fire extinguisher in the future. Remove the pin from the hole. This will allow you to extinguish the fire using the extinguisher. Concentrate your fire at the heart of the blaze.

How do you use a pass method for a fire extinguisher?

When using a fire extinguisher, keep the following words in mind: PASS:

  1. Remove the pin from the hole. Extinguish the fire with the nozzle pointed away from you while holding the extinguisher and releasing the locking mechanism
  2. Aim for the low-hanging fruit. Direct the fire extinguisher to the heart of the blaze.
  3. Squeeze the lever in a slow and steady motion.
  4. Side-to-side movement of the nozzle is recommended.

How far away should you stand when you are using a fire extinguisher to put out a fire 4 feet 6 feet 8 feet 10 feet?

In order to effectively use a fire extinguisher to put out a fire, you need first determine how far away you should stand from the flames. The right response is C, which is 8 feet. According to the FEMA (Federal Emergency Management Agency), it is advised that you stand at least 8 feet away from a fire when extinguishing it.

You might be interested:  Do Food Banks Take Fresh Fruit?

What is the advised distance to use a fire extinguisher from UK?

You should be no more than 30 metres away from the proper extinguisher on any given level of your facilities, according to current British Standards (BS 5306).

When using a fire extinguisher to put out a fire you should sweep at the ___ of the fire?

Sweep the nozzle from side to side as you approach the fire, directing the extinguishing chemical to the base of the flames as you go closer to the fire. Examine the area around an A Class fire after it has been extinguished for any smouldering hot spots that might rekindle the fire.

What is the proper way to use a fire extinguisher quizlet?

The terms in this collection (4) Remove the pin from the hole. Extinguish the fire by aiming it at the near edge and bottom of the flames. Squeeze the extinguisher handle to release the extinguisher. Sweep the extinguisher from side to side at the base of the fire to extinguish it completely.

Which Class of fire extinguishers are water based extinguishers quizlet?

Class A extinguishers are water-based solutions that are used to put out fires caused by paper, fabric, wood, rubbish, and other common flammable materials. When used on Class A flames, these extinguishers employ a cooling and soaking stream that is highly effective.

What does pass stand for in fire Life Safety?

Extinguishers are used in accordance with the acronyms RACE (Rescue, Alarm, Confine, and Extinguish) for firefighting protocols and PASS (Pull the pin, Aim at base of fire, Squeeze handle, and Sweep side to side) for extinguisher usage, which are both included in the language.

You might be interested:  Which Of The Following Is Symptomatic Of Sleep Apnea?

What is the distance you have to maintain from the site of fire?

A gap of three meters should be maintained when extinguishing a fire. A portable or transportable fire extinguisher is a piece of equipment that may be used to extinguish a minor fire almost anywhere.

How far back should a fire extinguisher be from a fire?

Keep in mind where you should aim the suppressant (in the heart of the fire) and how far away you should be from the fire (5-12 feet). As you point the extinguisher at the flames and push the handle, you should sweep the extinguisher from side to side.

What are the 4 steps of using a fire extinguisher?

When it comes to using a fire extinguisher, the abbreviation ″PASS″ is used to denote the four key stages that must be followed. Pull. The first step is to remove the pin located at the top of the extinguisher’s handle. Aim. Assure that you are at a safe distance from the fire and that the extinguisher’s outlet is aimed at the base of the flames. Squeeze.

Can you touch the nozzle on a fire extinguisher?

If you are using a CO2 extinguisher, be careful not to contact the discharge nozzle, since you may suffer frostbite. Sweep from side to side across the base of the flames as you gently approach it with your eyes closed.

Leave a Reply

Your email address will not be published. Required fields are marked *